Exam Number 300-075 CIPTV2
Associated Certifications CCNP Collaboration
Duration 75 Minutes (50 – 60 questions)
Available Languages English
This exam tests candidates seeking CCNP Collaboration on their ability for implementing a Cisco Unified Collaboration solution in a multisite environment. It covers Uniform Resource Identifier (URI) dialing, globalized call routing, Intercluster Lookup Service and Global Dial Plan Replication, Cisco Service Advertisement Framework and Call Control Discovery, tail-end hop-off, Cisco Unified Survivable Remote Site Telephony, Enhanced Location Call Admission Control (CAC) and Automated Alternate Routing (AAR), and mobility features such as Device Mobility, Cisco Extension Mobility, and Cisco Unified Mobility. The exam also describes the role of Cisco Video Communication Server (VCS) Control and the Cisco Expressway Series and how they interact with Cisco Unified Communications Manager.
The following course is the recommended training for this exam.
Implementing Cisco IP Telephony & Video, Part 2 (CIPTV2)
Cisco Technology Training for Collaboration E-Learning
Courses listed are offered by Cisco Learning Partners-the only authorized source for Cisco IT training delivered exclusively by Certified Cisco Instructors. Check the List of Learning Partners for a Cisco Learning Partner nearest you.
The Implementing Cisco IP Telephony & Video, Part 2 (CIPTV2) v1.0 exam is a 75 minute 55-65 question assessment that tests candidates seeking CCNP Collaboration on their ability for implementing a Cisco Unified Collaboration solution in a multisite environment. It covers Uniform Resource Identifier (URI) dialing, globalized call routing, Intercluster Lookup Service and Global Dial Plan Replication, Cisco Service Advertisement Framework and Call Control Discovery, tail-end hop-off, Cisco Unified Survivable Remote Site Telephony, Enhanced Location Call Admission Control (CAC) and Automated Alternate Routing (AAR), and mobility features such as Device Mobility, Cisco Extension Mobility, and Cisco Unified Mobility. The exam also describes the role of Cisco Video Communication Server (VCS) Control and the Cisco Expressway Series and how they interact with Cisco Unified Communications Manager.
The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.
1.0 VCS Control 17%
1.1 Configure registration of devices
1.2 Explore the fundamentals of subzones
1.3 Describe zone plans for VCS
1.4 Describe and configure traversal zones
1.5 Describe the benefits and configuration of transforms and create call policies
1.6 Explore VCS searches for endpoints
1.7 Integrating LDAP
1.8 Explain DNS and SRV records and document requirements for SRV records
1.9 Describe how clustering and replication works and configure a cluster
1.10 Configure interworking with VCS
1.11 Configure H.323 (including gatekeeper) and SIP
1.12 Configure trunking
2.0 Collaboration Edge (VCS Expressway) 12%
2.1 Identify and configure the requirements when deploying a collaboration edge
2.2 Establish a relationship between C/Expressway E and CUCM
2.3 Document and produce requirements for firewall and NAT configuration
2.4 Describe and implement privacy and security controls for external devices and calls
2.5 Describe elements in a traversal call (H.460 and Assent)
3.0 Configure CUCM Video Service Parameters 9%
3.1 Configure DSCP
3.2 Configuring clusterwide parameters system QoS
4.0 Describe and Implement Centralized Call Processing Redundancy 10%
4.1 Describe device fail over
4.2 Configure call survivability
4.3 Configure Cisco Unified Survivable Remote Site Telephony operation
4.4 Verify redundancy operations
5.0 Describe and Configure a Multi-site Dial Plan for Cisco Unified Communications Manager 17%
5.1 Describe the issues with multi-site dial plans
5.2 Describe the differences between the various gateways and trunk types supported by
Cisco Unified Communication Manager
5.3 Implement trunks to VCS
5.4 Describe globalized call routing based on URI dial plans and ILS
5.5 Implement a numbering plan for multi-site topologies
6.0 Implement Call Control Discovery/ILS 14%
6.1 Configure Service Advertisement Framework Forwarder
6.2 Configure Service Advertisement Framework Client Control
6.3 Configure Service Advertisement Framework Call Control Discovery
6.4 Configure URI calling
6.5 Configure ILS network
6.6 Configure Global Dial Plan Replication
7.0 Implement Video Mobility Features 9%
7.1 Configure extension mobility, and device mobility
7.2 Configure unified mobility (including video)
8.0 Implement Bandwidth Management and Call Admission Control on CUCM 12%
8.1 Configure regions
8.2 Implement transcoders and MTPs
8.3 Configure locations CAC and Enhanced CAC
8.4 Correlate events based on traces, logs, debugs and output of monitoring tools
8.5 Parse and interpret traces, logs, debugs and output of monitoring tools
When multiple Cisco Extension Mobility profiles exist, which actions take place when a user tries to log in to Cisco Extension Mobility?
A. The login will fail because only a single Cisco Extension Mobility profile is allowed.
B. The user must select the desired profile.
C. The user must login to both profiles in the order they are presented.
D. The user may login to both profiles in any order.
E. Login will only be allowed to multiple profiles if the service parameter Allow Multiple Logins is enabled.
Incorrect answer: A, C, D, E
Users access Cisco Extension Mobility by pressing the Services or Applications button on a Cisco Unified IP Phone and then entering login information in the form of a Cisco Unified Communications Manager UserID and a Personal Identification Number (PIN). If a user has more than one user device profile, a prompt displays on the phone and asks the user to choose a device profile for use with Cisco Extension Mobility.
Which ability does the Survivable Remote Site Telephony feature provide?
A. a means to allow the local site to continue to send and receive calls in the event of a WAN failure
B. a means to route calls on-net through other sites during high utilization periods
C. a method that allows for backup calls in the event that your gateway fails
D. the ability to force a call out of a certain trunk when the Cisco Unified Communications Manager is being upgraded
What is the fastest way for an engineer to test the implementation of SRST in a production environment?
A. Shut down the Cisco Unified Communications Manager Servers.
B. Shut down the switch ports connected to the Cisco Unified Communications Manager Servers.
C. Add a null route to the publisher Cisco Unified Communications Manager at the remote router. Remove the null route when the operation is verified.
D. Unplug the IP phones from their switch ports.
E. Verification is not needed.
Refer to the exhibit.
The HQ site uses area code 650. The BR1 site uses area code 408. The long distance
A Composite Solution With Just One Click – Certification Guaranteed 3
national code for PSTN dialing is 1. To make a long distance national call, an HQ or BR1 user dials access code 9, followed by 1, and then the 10-digit number.
Both sites use MGCP gateways. AAR must use globalized call routing using a single route pattern. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit.
Which partition should be configured in the AAR CSS applied at the phones?
A. PSTN partition
B. LD partition
C. The HQ AAR CSS must include a partition assigned to route pattern 91408XXXXXXX. The BR1 AAR CSS must include a partition assigned to route pattern 91650XXXXXXX.
D. AAR CSS must contain translation pattern 9.1[2-9]XX[2-9]XXXXXX for each site that must be globalized. Otherwise the called numbers will not be localized at the egress gateway.
Refer to the exhibit.
The HQ Cisco Unified Communications Manager has been configured for end-to-end RSVP. The BR Cisco Unified Communications Manager has been configured for local
RSVP between the locations assigned to the IP phones and SIP trunks at each site are configured with mandatory RSVP. When a call is placed from the IP phone at HQ to the BR phone at the BR site, which statement is true?
A. The Cisco Unified Communications Manager at HQ will fall back to local RSVP and place the call. No RSVP end-to-end will occur.
B. RSVP end-to-end will occur.
C. The Cisco Unified Communications Manager at HQ will use end-to-end RSVP. The BR Cisco Unified Communications Manager will use local RSVP.
D. The call will fail.
E. The call will proceed as a normal call with no RSVP reservation.
Incorrect answer: A, B, C
A possible cause is that the same router is being used as the calling and called RSVP agents, and that router is not running the latest IOS version, which supports loopback on RSVP reservation. Make sure that the router is running the latest IOS version.
Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02rsvp.html #wp1155102