Which two security features are associated with a wireless network employing 802.11i configured
as a Robust Security Network? (Choose two.)
Before conducting a passive RF site survey with a standalone AP, which two of these should be
statically configured on the AP? (Choose two.)
A. passive client
B. channel assignment
D. Tx power level
E. channel scan defer priority
After interviewing a customer to understand wireless client requirements, you determine that
802.11b must be enabled to support legacy clients within a mixed-mode environment. Which
recommendation will have the greatest impact on mitigating the effects of 802.11b clients on the
rest of the network?
A. Restrict OFDM modulation from being used.
B. Make 11 Mb/s the lowest mandatory rate.
C. Enable a separate SSID for 802.11b clients.
D. Enable a short preamble.
In a Cisco Unified Wireless Network environment, which two of these are required in order for
clients to connect with MCS data rates? (Choose two.)
B. client MFP
C. multiple spatial streams
E. 40-MHz channels
The 802.11-2007 standard includes which two amendments to the original 802.11 standard?
You are designing a wireless network utilizing EAP-TLS. One design requirement is to provide
per-user differentiated QoS using only one SSID. What is the best way to achieve this goal?
A. using WMM override
B. using Cisco Airespace VSAs
C. using QoS Enhanced BSS
D. using AP groups
What does the letter P in the designation of the AIR-CAP3502P AP indicate?
A. The AP supports the new IEEE 802.11p (WAVE) wireless standard.
B. The AP requires professional installation.
C. The AP can be used in plenum applications.
D. The AP is compatible with polarization type antennae.
You are converting your wireless infrastructure from a data-only design to a location services
design. Which task do you need to complete?
A. Disable the DSSS speeds for RFID compatibility.
B. Use fewer APs to avoid RFID 3D imaging.
C. Set APs to maximum power for RF fingerprinting.
D. Locate APs at the edges of your coverage area for trilateration.
Which statement about heat maps on Cisco WCS is true?
A. They are predictive and rely only on the accuracy of the information that is provided with the map.
B. They are based on real-time actual values if Cisco Compatible Extensions is enabled on the APs.
C. They are predictive but can be converted to real values by using the Refresh from network button.
D. They are based on real-time actual values because of fingerprinting.
A clause 15 radio uses ___________ and supports data rates of ___________ .
A. FHSS or DSSS, 1 Mb/s up to 11 Mb/s
B. DSSS, 1 Mb/s and 2 Mb/s
C. FHSS, 1 Mb/s and 2 Mb/s
D. DSSS, 1 Mb/s up to 11 Mb/s